SUDS solutions

Implementation of SUDS scheme with capability of removing surface water quickly from busy carriageway. Collect and convey surface water run-off to prevent any standing water build-up. Support installed soakaways with additional attenuation capacity. Minimise both in-carriageway and below ground infrastructure. Recognising it needed to...

The objective was to create a fully integrated sustainable drainage system (SuDS) to manage surface water run-off from all hard standing areas across the site. To realise an ambitious SuDS scheme using a range of ACO products as a means of conveyance to the retention pond which controls the safe release of water into the adjacent stream...

Built during the late 1990s by Persimmon Homes, the Elvetham Heath site was developed over sandy soil, which offered some infiltration through soakaways at the top of the site, but none at the lower end. To protect against surface water flooding, the Environment Agency required runoff rates from the impermeable surfaces of 2.72 litres per second...

The ACO SuDS swale inlet unit is an aesthetically-pleasing solution for drainage applications where proprietary conveyance systems are linked to vegetated infiltration features such as swales, basins, ponds and water courses. The ACO SuDS swale inlet can be integrated into any SuDS drainage scheme where there is a requirement to manage water on or...

Creation of a landscaped sales village with surface water run-off used sustainably to create a series of ponds and wetlands. Stand-alone system with no connection to sewer or watercourse. Provide sufficient attenuation to prevent standing water in customer access areas. Visually harmonise with rural landscape setting. WDW worked with ACO’s Design...

The objective was to enable surface water run-off generated from the site’s refurbished car parks to be managed within a sustainable drainage system that supports a series of visually striking landscaped retention ponds. Allow the car and lorry parking hardstanding to be extended with no increase in discharge to the existing stormwater sewer...

Mansfield Brick manufacturing facility, Nottinghamshire, required a self-contained SUDS system to manage all surface water within the curtilage of the facility, and with load bearing characteristics that could withstand a demanding industrial environment. Attenuate, clean and return all surface water to ground within facility boundary. Fully value...

Buckshaw Village required the use of SUDS techniques to remove all standing water from new access road to landmark housing development. System to minimise below ground infrastructure. Low-carbon, locally sourced recycled materials to be used. Easy to install, clean and maintain. In granting permission to develop the site both Borough and County...

Highway degradation and surface water pollution in an environmentally sensitive area of the Scottish Cairngorms Mountains famous for its whisky production have been tackled with an imaginative SuDS Solution from Hydro International which has averted potential road safety problems on the A95. Poor drainage, flooding and freezing weather had led to...

“We needed a surface water attenuation solution for Trenwith Car Park which would be highly effective within the site’s existing footprint, and would not badly disrupt the users of the car park during construction,” comments Nigel Higgins, project leader, Highways, for Cornwall Council. “Since its installation in 2010, we have had no more...

ACO Water Management’s StormBrixx system has been utilised as part of a SuDS design for exceedance at Telford Co-operative Academy. ACO worked closely with the Project Engineers to develop a multi-functional solution able to manage...

Enviro-Pave surfacing is made from rubber granules (from recycled rubber tyres) and decorative aggregates bound together with a specially formulated polyurethane binder. It is a water-permeable surfacing solution that fully meets SuDS requirements. Its slip-resistant qualities make it perfect for inclined...

Addagrip offers a CPD for architects and specifiers on SuDS-compliant resin bound surfacing. The seminar can be delivered as a live webinar to suit your schedule or face-to-face at your offices, and covers all aspects of resin bound paving, including: resin bound porous surfacing; tree pit systems; SuDS requirements; recommended base build-ups...

Resin bound paving is a permeable, decorative, SuDS-compliant surfacing system incorporating specially-selected natural, coloured or recycled aggregates and is suitable for roads, footpaths, driveways, car parks, gardens, heritage sites and other commercial applications. Due to its permeable properties, it is particularly suited to landscaped...

Trailflex Standard low-cost, environmentally-friendly, SuDs-compliant and BREEAM-accredited permeable paving is flexible up to 90°. Providing fast and efficient drainage of rainwater, the unrivalled porosity can drain up to 80,000 litres per square metre per hour replenishing groundwater and allowing surrounding trees and plants to thrive. The...

Trailflex low-cost, environmentally-friendly, SuDs-compliant and BREEAM-accredited permeable tree pit paving is flexible up to 90°. Providing fast and efficient drainage of rainwater, the unrivalled porosity can drain up to 80,000 litres per square metre per hour replenishing groundwater and allowing surrounding trees and plants to thrive. The...

850m2 of Trailflex sustainable and durable permeable paving was installed at Whipsnade Zoo's tiger enclosure viewing points and pathways leading to the play area....

Sudstech high-performance permeable paving enables the creation of decorative resin bound surfacing, with practical and durable qualities. Sudstech permeable paving is an eco-friendly SuDS-compliant (Sustainable Urban Drainage Systems) water management solution. Unlike other resin bound products, Sudstech utilises a recycled car tyre (SBRA...

Sudstech high-performance permeable paving enables the creation of decorative resin bound surfacing, with practical and durable qualities. Sudstech permeable paving is an eco-friendly SuDS-compliant (Sustainable Urban Drainage Systems) water management solution. Unlike other resin bound products, Sudstech utilises a recycled car tyre (SBRA...

AquaCell Next Gen (NG) is a modular surface water management tank manufactured from 100% recycled plastic. AquaCell NG is an infiltration trench system for surface drainage that can be used for swale-trench drainage and controlled discharge with retention. The system can be used across landscaped areas, residential developments, car parks and...

Flooding and climate change are increasing, creating a concerning rise in floodwater damage. To protect against the damage caused by excess water overwhelming standard drainage systems, more developers are turning to SuDs (Sustainable Drainage Systems). Over 200 students set to descend on the halls in September 2018, the developer needed a...

Rubber-Gravel Mix (SBRA) combines the flexibility of rubber with the strength, appeal and durability of natural stone aggregate. Can be used as a base underneath products like wet pour, artificial grass or bound gravel, or as a stand-alone surface. Porous and slip-resistant, Rubber-Gravel Mix allows for sustainable drainage in cities, towns and...

Southampton City Council wanted a hard-wearing, slip-resistant surface with SuDS credentials for an area that is central to the city's tourism. Kingsbridge Lane is one of the first areas visitors see when arriving by train and therefore a key area for regeneration. DekorGrip's BBA-approved Resin Bound surfacing...

Discover Sustainable Urban Drainage Like Never Before! Unlock the full potential of sustainable surfacing solutions with Addagrip Terraco's exclusive CPD presentation on SuDS (Sustainable Drainage Systems), hosted by our Specification Manager, Mark Wilmot. Dive into a transformative learning experience that balances ecological responsibility with...